10/100Base-TX to 100Base-FX Bridge Media Converters
Overview
The PLANET FT-80X is Fast Ethernet Bridge 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter. It supports selectable for half-duplex and full-duplex operations and supports a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation, in fiber-optic interface. The fiber port of converter operates at 1310 nm and uses ST, SC, MT-RJ, VF-45 or WDM connectors. Multi-mode models that support distances up to 2 km and single-mode models that support distances up to 15/35/50 km are available.
The FT-80x series are with LFP (Link Fault Pass Through function) (LLCF/LLR) and the DIP Switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitor the net. The DIP Switch provides disable or enable the LFP function.
LLCF (Link Loss Carry Forward) means when a device connected to the converter and the TP line loss the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device connected to the converter and the fiber line loss the link, the converter's fiber will disconnect the link of transmit. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitor the net.
|
| |
|
| Ordering Information |
| FT-801 |
10/100Base-TX to 100Base-FX (ST, MM) Bridge Media Converter -2km |
| FT-802 |
10/100Base-TX to 100Base-FX (SC, MM) Bridge Media Converter -2km |
| FT-802S15 |
10/100Base-TX to 100Base-FX (SC, SM) Bridge Media Converter - 15km |
| FT-802S35 |
10/100Base-TX to 100Base-FX (SC, SM) Bridge Media Converter - 35km |
| FT-802S50 |
10/100Base-TX to 100Base-FX (SC, SM) Bridge Media Converter - 50km |
| FT-803 |
10/100Base-TX to 100Base-FX (MT-RJ, MM) Bridge Media Converter |
| FT-806A20 * |
10/100Base-TX to 100Base-FX (WDM TX:1310nm, SM) Bridge Media Converter -20km |
| FT-806B20 * |
10/100Base-TX to 100Base-FX (WDM TX:1550nm, SM) Bridge Media Converter -20km |
| Remark * |
FT-806A20/806B20 should runs in pair. It means you must connect FT-806A20 in one end another FT-806B20 in other end. |
Application
Standalone and Centralized Management Media Converter Installation
Affording the current network grows and expanding, the PLANET FT-80x provide advanced Media conversion technology to fill this kind of demand. The FT-80x series Media COnverter provide the diverse fiber connecting types of options to meet different network applications. It is very flexible for FT-80x to work as a standalone device or install into the central Standard Media converter chassis for centralized power provide. The FST-80x is ideal solution for building a network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) and FTTB (Fiber to the Building) for ISPs, campuses and enterprises. |
| |
|
|
| |
|
| Ordering Information |
| FT-801 |
10/100Base-TX to 100Base-FX (ST, MM) Bridge Media Converter -2km |
| FT-802 |
10/100Base-TX to 100Base-FX (SC, MM) Bridge Media Converter -2km |
| FT-802S15 |
10/100Base-TX to 100Base-FX (SC, SM) Bridge Media Converter - 15km |
| FT-802S35 |
10/100Base-TX to 100Base-FX (SC, SM) Bridge Media Converter - 35km |
| FT-802S50 |
10/100Base-TX to 100Base-FX (SC, SM) Bridge Media Converter - 50km |
| FT-803 |
10/100Base-TX to 100Base-FX (MT-RJ, MM) Bridge Media Converter |
| FT-806A20 * |
10/100Base-TX to 100Base-FX (WDM TX:1310nm, SM) Bridge Media Converter -20km |
| FT-806B20 * |
10/100Base-TX to 100Base-FX (WDM TX:1550nm, SM) Bridge Media Converter -20km |
| Remark * |
FT-806A20/806B20 should runs in pair. It means you must connect FT-806A20 in one end another FT-806B20 in other end. |
Key Features
• Comply with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX Standard
• Connectors: One RJ-45 (Auto-MDI/MDI-X) Twisted Pair, EIA568
• One Fiber-optic, 1310nm wavelength, connector-type and distance vary with model
- FT-806A20: Tx-1310nm, Rx-1550nm
- FT-806B20: Tx-1550nm, Rx-1310nm
• Data Transfer Rate:
- TP: 10/100Mbps
- FX: 100Mbps
• Duplex mode support:
- Full or half-duplex mode by Auto-Negotiation (TP)
- Full or half-duplex mode by DIP-switch (FX)
• LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL
• DIP-switch: 2 DIP-switches
- Rear DIP-switch: FX duplex mode selection
- Side DIP-switch: LFP (Link Fault Pass-through) mode selection |
| |
|
| Ordering Information |
| FT-801 |
10/100Base-TX to 100Base-FX (ST, MM) Bridge Media Converter -2km |
| FT-802 |
10/100Base-TX to 100Base-FX (SC, MM) Bridge Media Converter -2km |
| FT-802S15 |
10/100Base-TX to 100Base-FX (SC, SM) Bridge Media Converter - 15km |
| FT-802S35 |
10/100Base-TX to 100Base-FX (SC, SM) Bridge Media Converter - 35km |
| FT-802S50 |
10/100Base-TX to 100Base-FX (SC, SM) Bridge Media Converter - 50km |
| FT-803 |
10/100Base-TX to 100Base-FX (MT-RJ, MM) Bridge Media Converter |
| FT-806A20 * |
10/100Base-TX to 100Base-FX (WDM TX:1310nm, SM) Bridge Media Converter -20km |
| FT-806B20 * |
10/100Base-TX to 100Base-FX (WDM TX:1550nm, SM) Bridge Media Converter -20km |
| Remark * |
FT-806A20/806B20 should runs in pair. It means you must connect FT-806A20 in one end another FT-806B20 in other end. |
Specification
| Product |
| Protocol |
IEEE 802.3, 10Base-T
IEEE 802.3u, 100Base-TX
IEEE 802.3u, 100Base-FX |
| Dimension (W x D x H) |
97 x 69 x 26 mm |
| Weight |
0.2kg |
| Power |
5V DC, 2A, max. |
| Connectors and Cables |
| Twisted Pair / STP |
RJ45, Category 5 (EIA/TIA 568) |
| Fiber-optic |
FT-801 : ST / Multi-mode / 2km
FT-802 : SC / Multi-mode / 2km
FT-803: MTRJ / Multi-mode / 2km
FT-802S15 : SC / Single Mode / 15km
FT-802S35 : SC / Single Mode / 35km
FT-802S50 : SC / Single Mode / 50km
FT-806A20: WDM SC / Single Mode / 20km
FT-806B20: WDM SC / Single Mode / 20km |
| Multi-mode cable |
50/125, 62.5/125 µm |
| Single-Mode (SM) cable |
9/125 µm |
| Optic Wavelength |
FT-801: 1310nm
FT-802: 1310nm
FT-803: 1310nm
FT-802S15: 1310nm
FT-802S35: 1310nm
FT-802S50: 1310nm
FT-806A20: TX: 1310nm; RX: 1550nm
FT-806B20: TX: 1550nm; RX: 1310nm |
| Launch Power (dBm) Max. |
FT-801: -14
FT-802: -14
FT-803: -14
FT-802S15:0
FT-802S35:-8
FT-802S50:0
FT-806A20:-8
FT-806B20:-8 |
| Launch Power (dBm) Min. |
FT-801: -20 (62.5/125µm), -23.5 (50/125µm)
FT-802: -20 (62.5/125µm), -23.5 (50/125µm)
FT-803: -20 (62.5/125µm), -23.5 (50/125µm)
FT-802S15: −20
FT-802S35: -15
FT-802S50:-5
FT-806A20:-14
FT-806B20:-14 |
| Receive Sensitivity (dBm) |
FT-801: -31.8
FT-802: -31.8
FT-803: -31.8
FT-802S15: -32
FT-802S35:-34
FT-802S50: -35
FT-806A20:-31
FT-806B20:-31 |
| Maximum Input power (dBm) |
FT-801: -14
FT-802: -14
FT-803: -14
FT-802S15:0
FT-802S35:0
FT-802S50:0
FT-806A20:0
FT-806B20:0 |
| Supported Distances and function |
| Twisted Pair STP |
100 m / 328 ft. |
| Multi-mode Fiber Optic |
412 m / 1,350 ft. (Half-Duplex)
2 km / 1.2 mile. (Full-Duplex) |
| Single-Mode (SM) |
412 m / 1,350 ft. (Half-Duplex)
15 km / 9 mile. (Full-Duplex)
20 km / 12 mile. (Full-Duplex)
35 km / 21 mile. (Full-Duplex)
50 km / 31 mile. (Full-Duplex) |
| Port Mode |
TP: Half and Full Duplex, auto-negotiation
FX: Half and Full Duplex via DIP switch |
| Environmental & Emissions |
| Operating Environment |
Temperature: 0~50 Degree C
Humidity: 5~90% non-condensing |
| Storage Environment |
Temperature: -40~70 Degree C
Humidity: 5~90% non-condensing |
| Emissions |
FCC Class A, CE Class A |
|
| Ordering Information |
| FT-801 |
10/100Base-TX to 100Base-FX (ST, MM) Bridge Media Converter -2km |
| FT-802 |
10/100Base-TX to 100Base-FX (SC, MM) Bridge Media Converter -2km |
| FT-802S15 |
10/100Base-TX to 100Base-FX (SC, SM) Bridge Media Converter - 15km |
| FT-802S35 |
10/100Base-TX to 100Base-FX (SC, SM) Bridge Media Converter - 35km |
| FT-802S50 |
10/100Base-TX to 100Base-FX (SC, SM) Bridge Media Converter - 50km |
| FT-803 |
10/100Base-TX to 100Base-FX (MT-RJ, MM) Bridge Media Converter |
| FT-806A20 * |
10/100Base-TX to 100Base-FX (WDM TX:1310nm, SM) Bridge Media Converter -20km |
| FT-806B20 * |
10/100Base-TX to 100Base-FX (WDM TX:1550nm, SM) Bridge Media Converter -20km |
| Remark * |
FT-806A20/806B20 should runs in pair. It means you must connect FT-806A20 in one end another FT-806B20 in other end. |
Download
Datasheet
| Date |
Version |
Description |
Download |
| 2007-12-14 |
1.0 |
FT-80X |
 |
User's Manual
| Date |
Version |
Description |
Download |
| 2011-11-11 |
7.2 |
Multi-language version. |
|
| 2010-06-09 |
7.1 |
Energy note releases. |
|
EC Declaration
| Date |
Version |
Description |
Download |
| 2011-09-15 |
4.1 |
Release Updated. |
|
|
|
| Ordering Information |
| FT-801 |
10/100Base-TX to 100Base-FX (ST, MM) Bridge Media Converter -2km |
| FT-802 |
10/100Base-TX to 100Base-FX (SC, MM) Bridge Media Converter -2km |
| FT-802S15 |
10/100Base-TX to 100Base-FX (SC, SM) Bridge Media Converter - 15km |
| FT-802S35 |
10/100Base-TX to 100Base-FX (SC, SM) Bridge Media Converter - 35km |
| FT-802S50 |
10/100Base-TX to 100Base-FX (SC, SM) Bridge Media Converter - 50km |
| FT-803 |
10/100Base-TX to 100Base-FX (MT-RJ, MM) Bridge Media Converter |
| FT-806A20 * |
10/100Base-TX to 100Base-FX (WDM TX:1310nm, SM) Bridge Media Converter -20km |
| FT-806B20 * |
10/100Base-TX to 100Base-FX (WDM TX:1550nm, SM) Bridge Media Converter -20km |
| Remark * |
FT-806A20/806B20 should runs in pair. It means you must connect FT-806A20 in one end another FT-806B20 in other end. |
